Japan

Brand: Hitohira ひとひら (一片)
Blacksmith: Ashi Hamono 芦刃物製作所
Profile: Gyuto
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Steel Type: Stainless Steel
Steel: Mono Swedish Stainless Steel
Handle: Ebony & Buffalo Horn Ferrule Octagonal
Handle Length: 145mm
Total Length: 389mm
Edge Length: 234mm
Spine Length: 244mm
Blade Height: 50mm
Thickness of Spine at Handle: 2.2mm
Thickness of Spine Half Way: 2mm
Thickness of Spine ~1cm from Tip: 1mm
Weight: 177g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Echizen 
Profile: Yanagiba
Edge Length: 203mm
Blade Height: 31mm
Edge Steel: Blue #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Single
Bevel Symmetry:  0/100 
Hand Orientation: Right Handed
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 213mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 342mm
Weight: 120g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら
Line: Echizen
Profile: Santoku 
Edge Length: 183mm
Blade Height: 51mm
Edge Steel: SG2
Steel Type: Stainless Steel
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Keyaki Zelkova
Ferrule/Bolster Material: Pakka
Spine Length: 201mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.6mm
Handle Length: 127mm
Total Length: 327mm
Weight: 156g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら
Line: Echizen
Profile: Gyuto 
Edge Length: 212mm
Blade Height: 50.2mm
Edge Steel: SG2
Steel Type: Stainless Steel
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Keyaki Zelkova
Ferrule/Bolster Material: Pakka
Spine Length: 228mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 140mm
Total Length: 370mm
Weight: 156g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Made in:  Seki-Gifu/ Japan
Line: FJ VG10
Profile: Kiritsuke Petty
Edge Length: 146mm
Blade Height: 30mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Convex
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Black Buffalo Horn
Total Length: 275mm
Spine Length: 155mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 121mm
Weight: 55g
Saya/Guard: Purchased Separately 

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in:  Seki-Gifu/ Japan
Line: FJ SG2 Mirror
Profile: Bunka
Edge Length: 179mm
Blade Height: 47mm
Edge Steel: SG2 Powder Metal
Steel Type: Stainless
Grind: Convex
Construction: Awase Clad
Cladding: Stainless
Finish: Mirror
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Linen Micarta
Ferrule/Bolster Material: Stainless Steel
Total Length: 296mm
Spine Length: 173mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 173g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Nakiri
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Stainless Kurouchi Nashiji
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal
Total Length: 315mm
Edge Length: 162mm 
Spine Length:  180mm
Blade Height: 51mm
Spine Thickness: 1.7mm
Handle Length: 135mm
Weight: 157g 
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana - Ginsanko
Profile: Kiritsuke Gyuto
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Cladding: Stainless Migaki
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Wa
Total Length: 370mm
Edge Length:212mm
Spine Length: 225mm
Blade Height: 45mm
Spine Thickness at Handle: 2.6mm
Spine Thickness 1cm from Tip: 1.1mm
Handle Length: 145mm
Weight: 141g
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Gyuto
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Cladding: Stainless
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Wa
Total Length: 402mm
Edge Length: 242mm
Spine Length: 257mm
Blade Height: 48mm
Spine Thickness at Handle: 3.1mm
Spine Thickness 1cm from Tip: 0.8mm
Handle Length: 145mm
Weight: 163g
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Futana
Profile: Gyuto
Edge Length: 216mm
Edge Steel: Ginsanko (S3)
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Wa
Total Length: 377mm 
Spine Length: 230mm 
Blade Height: 47mm 
Thickness at Spine: 1.7mm 
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6
Handle Length: 144mm 
Weight: 156g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Gyuto
Edge Length: 246mm
Edge Steel: Ginsanko (Silver 3)
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Wa
Total Length: 401mm 
Spine Length: 256mm 
Blade Height: 48mm 
Thickness at Spine: 1.9mm 
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.8
Handle Length: 145mm 
Weight: 166g
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana - Super Blue
Profile: Gyuto
Edge Length: 247mm 
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Cladding: Stainless Kurouchi Tsuchime
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 401mm
Spine Length:  255mm
Blade Height: 49mm
Thickness: 1.8mm
Handle Length: 145mm
Weight: 171g 
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.