Sujihiki/Slicer

Ajikataya - White #2 - Kurouchi Nashiji - 270mm Sujihiki - Magnolia Handle

$295.00

Brand: Ajikataya
Made in: Sanjo, Japan
Line: Nashiji
Profile: Sujihiki
Edge Length: 280mm
Blade Height: 44mm
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Grind: Wide Bevel
Construction: Awase/Clad, San-Mai
Cladding: Soft Iron
Finish: Kurouchi Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 440mm
Spine Length: 295mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 144mm
Weight: 182g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Ajikataya - White #2 - Kurouchi Nashiji - 270mm Sujihiki - Magnolia Handle

Coutellerie Chambriard - Le Thiers - Grand Gourmet - 8" Carving Knife - Juniper Handle

$160.00

Brand: Coutellerie Chambriard
Profile: Carving
Steel Type: Swedish 14C28N stainless
Hand Orientation: Ambidextrous
Handle: Western Juniper
Total Length: 320mm
Edge Length: 201mm
Spine Length: 205mm
Blade Height: 28mm
Thickness at Spine: 2.7mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 118mm
Weight: 140g
Saya/Guard: Brown Leather Sheath

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Coutellerie Chambriard - Le Thiers - Grand Gourmet - 8" Carving Knife - Juniper Handle

Florentine Kitchen Knives - Blade Guard - Tan Leather - Bread Knife/Slicer

$50.00

Leather Sheath for Florentine Kitchen Knives bread knives.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Florentine Kitchen Knives - Blade Guard - Tan Leather - Bread Knife/Slicer

Florentine Kitchen Knives - Kedma - Sujihiki - Stacked Black Handle

$325.00

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Kedma
Profile: Sujihiki/Slicer
Edge Length: 274mm
Blade Height: 45mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless
Grind: Convex
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Stacked Octagonal
Handle Material: Black Micarta & Black Leather
Ferrule/Bolster Material: Brass
Total Length: 400mm
Spine Length: 282mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 120mm
Weight: 194g
Saya/Guard: Purchased Separately

Florentine Kitchen Knives - Kedma - Sujihiki - Stacked Black Handle

Goko Hamono - Kogetsu - Mono SK - 240mm Sujihiki - Western Handle

$240.00

Brand: Goko Hamono 五香刃物製作所
Line: Kogetsu 光月
Profile: Sujihiki
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: N/A, Mono-steel
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right-handed
Handle: Pakka Western
Total Length: 370mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 39mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 125mm
Weight: 161g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Goko Hamono - Kogetsu - Mono SK - 240mm Sujihiki - Western Handle

HADO - Ginsan Urushi Kijiro - 240mm Kiritsuke Sujihiki - Urushi Handle

$575.00

Brand: HADO
Smith: Shogou Yamatsuka
Sharpener: Tadataka Maruyama
Profile: Kiritsuke Sujihiki
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Mono Urushi Wa
Total Length: 385mm
Edge Length: 235mm
Spine Length: 245mm
Blade Height: 41mm
Thickness at Spine: 2.6mm
Thickness ½ way: 2mmm
Thickness ~1cm from Tip: 0.6
Handle Length: 140mm
Weight: 131g
Saya/Guard: N/A

HADO - Ginsan Urushi Kijiro - 240mm Kiritsuke Sujihiki - Urushi Handle

Hitohira - Futana - Ginsan - Migaki - 270mm Sujihiki - Cherry Handle

$225.00

Brand: Hitohira ひとひら (一片)
Line: Futana
Profile: Sujihiki
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Stainless
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Wood & Ebony Ferrule Octagonal
Total Length: 432mm
Edge Length: 272mm
Spine Length: 288mm
Blade Height: 38mm
Thickness of Spine at Handle: 2.3mm
Thickness of Spine Half Way: 1.8mm
Thickness of Spine ~1cm from Tip: 1.1mm
Handle Length: 145mm
Weight: 130g
Saya: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Futana - Ginsan - Migaki - 270mm Sujihiki - Cherry Handle

Hitohira - Futana - Ginsan - Nashiji - 240mm Sujihiki - Cherry Handle

$195.00

Brand: Hitohira ひとひら (一片)
Line: Futana
Profile: Sujihiki
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Stainless
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Octagonal
Total Length: 403mm
Edge Length: 245mm
Spine Length: 258mm
Blade Height: 35mm
Thickness of Spine at Handle: 2.3mm
Thickness of Spine Half Way: 2mm
Thickness of Spine ~1cm from Tip: 1.5mm
Handle Length: 144mm
Weight: 121g
Saya: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Futana - Ginsan - Nashiji - 240mm Sujihiki - Cherry Handle

Hitohira - Futana - S3 - Migaki - 240mm Sujihiki - Cherry Handle

$195.00

Brand: Hitohira ひとひら (一片)
Made In: Sakai, Osaka - Japan
Line: Futana
Profile: Sujihiki
Edge Steel: S3
Steel Type: Stainless
Cladding: Stainless
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Octagonal
Total Length: 403mm
Edge Length: 242mm
Spine Length: 258mm
Blade Height: 35mm
Thickness of Spine at Handle: 2.1mm
Thickness of Spine Half Way: 1.9mm
Thickness of Spine ~1cm from Tip: 1.0mm
Handle Length: 145mm
Weight: 127g
Saya: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Futana - S3 - Migaki - 240mm Sujihiki - Cherry Handle

Hitohira - Futana - Super Blue - Migaki - 270mm Sujihiki - Cherry Handle

$240.00

Brand: Hitohira ひとひら (一片)
Made in: Echizen, Japan
Line: Super Blue Migaki
Profile: Sujihiki
Edge Length: 272mm
Blade Height: 32mm
Edge Steel: Super Blue
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Stainless
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Total Length: 433mm
Spine Length: 281mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 145mm
Weight: 135g
Saya/Guard: Purchased Separatley

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Futana - Super Blue - Migaki - 270mm Sujihiki - Cherry Handle

Hitohira - Hinode - White #2 Nashiji - 270mm Sujihiki - Ho Wood Handle

$260.00

Brand: Hitohira
Line: Hinode
Profile: Sujihiki
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood Wa
Total Length: 425mm
Edge Length: 276mm
Spine Length: 292mm
Blade Height: 38mm
Thickness at Spine: 4.7mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 132mm
Weight: 159g
Saya/Guard: No

Hitohira - Hinode - White #2 Nashiji - 270mm Sujihiki - Ho Wood Handle

Hitohira - Imojiya KT - VG10 - 210mm Sujihiki - Micarta Handle

$175.00

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Imojiya KT
Profile: Sujihiki
Edge Length: 210mm
Blade Height: 34.5mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Linen Micarta Western
Total Length: 340mm
Spine Length: 215mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 125mm
Weight: 205g
Saya/Guard: Purchased Separately

Hitohira - Imojiya KT - VG10 - 210mm Sujihiki - Micarta Handle

Hitohira - Setsu Forged - VG10 Damascus - 255mm Sujihiki - Jutan Handle

$395.00

Brand: Hitohira ひとひら (一片)
Made in: Echizen-Fukui/ Japan
Line: Setsu Forged VG10 Damascus
Profile: Sujihiki
Edge Length: 259mm
Blade Height: 40mm
Edge Steel: VG10
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad
Cladding: Stainless
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Jutan Wood
Ferrule/Bolster Material: Black Pakka
Total Length: 410mm
Spine Length: 272mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 140mm
Weight: 149g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Setsu Forged - VG10 Damascus - 255mm Sujihiki - Jutan Handle

Hitohira - Setsu Forged - VG10 Damascus - 255mm Sujihiki - Rosewood Handle

$250.00

Brand: Hitohira ひとひら (一片)
Made in: Echizen-Fukui/ Japan
Line: Setsu Forged VG10 Damascus
Profile: Sujihiki
Edge Length: 258mm
Blade Height: 39mm
Edge Steel: VG10
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad
Cladding: Stainless
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Black Pakka
Total Length: 410mm
Spine Length: 270mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 1mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 140mm
Weight: 135g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Setsu Forged - VG10 Damascus - 255mm Sujihiki - Rosewood Handle

Hitohira - Togashi - White #1 - Stainless Clad - Kasumi - 240mm Sujihiki - Ebony Handle

$450.00

Brand: Hitohira ひとひら (一片)
Blacksmith: Togashi 富樫
Line: Stainless Clad Kasumi
Profile: Sujihiki
Edge Length: 232mm
Edge Steel: White #1
Steel Type: Carbon
Cladding: Stainless Clad Kasumi
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Ebony
Total Length: 390mm
Spine Length: 245mm
Handle Length: 145mm
Blade Height: 38mm
Thickness of Spine at Handle: 2.7mm
Thickness of Spine Half Way: 2.5mm
Thickness of Spine ~1cm from Tip: 1.4mm
Weight: 175g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

This knife is vintage and may include slight scratches, tarnish spots, etc. that it may have picked up over the decades.

Hitohira - Togashi - White #1 - Stainless Clad - Kasumi - 240mm Sujihiki - Ebony Handle

Hitohira - Togashi - White #1 - Stainless Clad - Migaki - 240mm Sujihiki - Ziricote Handle

$460.00

Brand: Hitohira ひとひら (一片)
Made in: Sakai, Japan
Smith: Kenji Togashi 富樫
Line: White #1 Stainless Clad
Profile: Sujihiki
Edge Length: 229mm
Blade Height: 38mm
Edge Steel: White #1
Steel Type: Carbon
Grind: Wide Double Bevel
Construction: Awase/Clad, San-Mai
Cladding: Stainless
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ziricote
Ferrule/Bolster Material: Buffalo Horn
Total Length: 388mm
Spine Length: 243mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 145mm
Weight: 170g
Saya/Guard: Purchased Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Togashi - White #1 - Stainless Clad - Migaki - 240mm Sujihiki - Ziricote Handle

Hitohira - Vintage SK - 300mm Sujihiki - Ebony Handle (No Bolster)

$125.00

Brand: Hitohira
Line: Vintage SK
Profile: Sujihiki
Edge Length: 305mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Ebony Pakka Western Handle
Total Length: 432mm
Spine Length: 309mm
Handle Length: 122mm
Blade Height: 44mm
Thickness of Spine at Handle: 2.7mm
Thickness of Spine Half Way: 2.3mm
Thickness of Spine ~1cm from Tip: 0.8mm
Weight: 216g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

This knife is vintage and may include slight scratches, tarnish spots, etc. that it may have picked up over the decades

Hitohira - Vintage SK - 300mm Sujihiki - Ebony Handle (No Bolster)

K Sabatier - 200 Range - 7" Slicer -G10

$165.00

Brand:
Made in:
Smith:
Sharpener:
Line:
Profile:
Edge Length: 179mm
Blade Height: 25mm
Edge Steel:
Steel Type:
Construction:
Cladding:
Finish:
Bevel:
Bevel Symmetry:
Hand Orientation:
Handle Shape:
Handle Material:
Ferrule/Bolster Material:
Total Length: 295mm
Spine Length: 191mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 106mm
Weight: 125g
Saya/Guard:

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

K Sabatier - Authentique - Carbon - 10" Slicer - Western Handle

$100.00

Brand:
Made in:
Smith:
Sharpener:
Line:
Profile:
Edge Length: 243mm
Blade Height: 31mm
Edge Steel:
Steel Type:
Construction:
Cladding:
Finish:
Bevel:
Bevel Symmetry:
Hand Orientation:
Handle Shape:
Handle Material:
Ferrule/Bolster Material:
Total Length: 364mm
Spine Length: 242mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 118mm
Weight: 171g
Saya/Guard:

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

K Sabatier - Authentique - Carbon - 10" Slicer - Western Handle

K Sabatier - Authentique - Carbon - 12" Slicer - Western Handle

$120.00

Brand:
Made in:
Smith:
Sharpener:
Line:
Profile:
Edge Length: 293mm
Blade Height: 33mm
Edge Steel:
Steel Type:
Construction:
Cladding:
Finish:
Bevel:
Bevel Symmetry:
Hand Orientation:
Handle Shape:
Handle Material:
Ferrule/Bolster Material:
Total Length: 414mm
Spine Length: 292mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 116mm
Weight: 190g
Saya/Guard:

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

K Sabatier - Authentique - Carbon - 12" Slicer - Western Handle

K Sabatier - Authentique - Carbon - 8" Slicer - Western Handle

$80.00

Brand:
Made in:
Smith:
Sharpener:
Line:
Profile:
Edge Length: 195mm
Blade Height: 26mm
Edge Steel:
Steel Type:
Construction:
Cladding:
Finish:
Bevel:
Bevel Symmetry:
Hand Orientation:
Handle Shape:
Handle Material:
Ferrule/Bolster Material:
Total Length: 309mm
Spine Length: 193mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.2mm
Handle Length: 107mm
Weight: 131mm
Saya/Guard:

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.